Perfectly imperfect – the beauty of natural stone means that there will be variations from piece to piece. There is not such things as a “perfect” piece of stone, which is what we love most about the unique nature of our products in this collection.
Granite – GEOLOGY
Granite is an igneous rock comprising mineral grains – primarily quartz and feldspar – that are big enough to distinguish with the human eye.
KEY QUALITY
There’s no such thing as indestructible, but granite is incredibly hard and durable and, even in its natural state, virtually impervious. Its colour and patterns vary through white, pinks and greys.
Limestone – GEOLOGY
A sedimentary rock mostly formed during the Jurassic period by deposits of shells collecting on the sea-bed and being compressed over time.
KEY QUALITY
Shell and fossil patterns and an infinite range of shades – usually from cream through to yellow, but also encompassing white and black.
Marble – GEOLOGY
The geological process that produces the prominent veins and quartz in the surface of marble is called recrystallization. The vivid colours vary depending on the prevalent minerals in the area from which it is quarried.
KEY QUALITY
Very hard and very smooth, with myriad colour tones and markings that are beautiful and mesmerising to look at.
Sandstone – GEOLOGY
A sedimentary rock made up of compacted grains of sand, bound together by a secondary mineral such as calcite, clay or silica.
KEY QUALITY
Hard-wearing, frost-resistant and low-slip make it ideal for outdoors.
Slate – GEOLOGY
A fine-grained rock derived from an original sedimentary rock made of clay or volcanic ash.
KEY QUALITY
The natural, slight undulations in the stone (caused by the way it is split when quarried) give it instant character. The dark colour makes it easy to maintain.
Travertine – GEOLOGY
The stone is a crystallized form of calcium carbonate, or limestone, deposited by mineral springs and characterised by surface pits and holes when first quarried. These are often filled with resin at source, giving the travertine a much smoother and more refined finish.
KEY QUALITY
‘Nature’s masterpiece’, has been a signature stone of Italian architecture from the Romans onwards. Especially when veincut, travertine has a full range of shades and natural pitting that give it a combination of character and sophistication. Perfect for feature walls and chic interiors. Be aware of variation thickness, finish variation and natural blemishes.
Porcelain
Porcelain tiles are made from a mixture of clays and minerals and fired at a very high temperature. This means that they are extremely hard wearing. Tip: Due to the nature of the manufacturing process, porcelain tiles may be subject to a very slight ‘bow’ along the length of larger tiles (this can normally be corrected using a specialist clip system). This slight bowing, which will fall within European Standards (and please be assured that all our tiles are CE compliant), can cause slight ‘lipping’ between one tile and the next. If you wish to minimize the effect of this, we recommend that tiles should be laid square, or staggered by not more than a third of a tile length, rather than laying brick-bond. Porcelain that is ‘non-rectified’ may vary very slightly in dimension, which means that a slightly wider grout joint needs to be used. NB ‘non-rectified’ porcelain products always carry a calibre code in order that tiles can be grouped together by their finished size.
RECTIFIED FINISH
Each porcelain tile is the same dimension, although there is still a small degree of tolerance.
Terrazzo
The same technique is used as encaustic tiles (see left), but ground marble chips are added to the top layer to add extra durability and visual effect. Please note this product requires sealing as part of the installation process.
Encaustic
Cement tiles differ from ceramic tiles in that the pattern or figure on the surface is a product of different colours of clay, rather than a glazed application. This is called the encaustic technique, where the pattern is inlaid into the body of the tile so that the design and colour remain, even as the tile wears. Cement tiles will age naturally and develop their own patina with time, like natural stones. Cement tiles are suitable for domestic and commercial use floors and walls. Accept imperfections. A major attraction, is their perfect imperfection. Thickness can vary slightly from tile to tile, as can pigment shadings, and patterns may bleed at the edges when they’re compressed, all enhancing their uniqueness. Another reason for their attraction is that they are a ‘living’ tile that changes over time. Encaustic tiles can be used on almost any internal floor or wall surface as long as the sub-base is suitable and prepared for tiling and weight-bearing because these tiles are a little more heavy than the average wall tile. The tiles can we used in wet areas but it’s likely they will fade slightly, especially darker colours and patterns due to the natural pigments used. If the tiles are coated with a thin layer of sealer every one or two years this will reduce, however, it is all part of the natural ageing process. The tiles are not classed as frost resistant so we do not recommend using them in external areas that are exposed to wet and freezing conditions. Please note this product requires sealing as part of the installation process.
Ceramic
These tiles are then glazed with a base colour and can be then over-printed or hand painted with a pattern. Glazed ceramic is suitable for domestic floors (where specified) and walls. Crackle glaze tiles will require sealing.
Glass
Glass has its own beauty, but can also be transformed by the natural or ambient light with sparkles, reflections and fascinating changes of colour. It’s easy to maintain and non-porous.